Product Details
For use on milling machines with or without existing stepper motors.
Our CNC Stepper Kit is a pre-configured system ready to put your mill back into service. It includes our X15-250 Control, Stepper Drives, mounting arm, and our IO6 Breakout Board. This system comes fully assembled and ready to install.
Includes 3- 8amp stepper drives which are very easy to set up and use. They do
not need any additional power supplies, you can wire 110-220VAC directly into the drive. If you buy stepper motors from us we will pre configure the drive to the motor and pre-wire the motor to the drive.
If you need motors with this system go to drives and motors and add them to your order. All the stepper motors that we sell will work with this system.
| CNC Control's Basic Features: | |
| Visual G-code and tool path display | | Includes multiple wizards. (wizards are like conversational programming) | | Unlimited program size | | Look-ahead for fast 2D and 3D contouring | | |
|
| Standard Digital CNC Control Features: | | Built in 24V power supply for breakout board | | 5v, 12v and 24v DC Power Connectors | | 24V Logic output | | Opto-isolated I/O (Inputs & Outputs)24 | | Complete spindle speed control circuitry | | Charge Pump safety circuit integrated to control all outputs | | Digital differential and single ended TTL (Pulse and Direction) interfaces for motion control for up to six axis | | Relay based I/O | | Total of 34 I/O | | Made in the USA! | | Size: 24" (W) X 15.5" (H) X 6.5" (D) + 2.5" breakout board pack on back of control | | | Turnkey upgrade for: | | Bridgeport mills | | Knee mills | | Vertical mills | | Horizontal mills | | Or any three to 5 axi machine that has stepper motors. | | Kit Includes: | | Standard digital CNC Control | | 3- 8amp Stepper Drives | | 15ft Control to Drive Cables | | 1 Mounting Arm for CNC Control | | | | | | | |
| Shipping: | Our standard package ships within 3-4 weeks.
Any additional options could take up to 6 - 10 days. Standard Shipping is UPS Ground | |
| Suggested Options: | We strongly suggest buying our Mounting arm for mounting this control.
Also you will need:
Limit Switches
An electrical enclosure to mount your drives. | |
Product Specifications
8 AMP Stepper Drive These drives are very easy to set up and use. They do
not need any additional power supplies, you can wire 110-220VAC directly into the drive.
If you buy this drive with our stepper motors we will pre configure the drive to the motor, and pre-wire the motor to the drive. Please be sure to select you motor wire length.
Also if you buy this drive with our IO6 Breakout Board or with one of our Digital CNC Controls we provide cables to plug the drive directly into our breakout board.
Features: - Low noise and high effective work
- With wide working voltage range
- Flexible Settings
- Perfect protection and Phase controlled circuit break functions
Specifications: - Differential step & direction
- Enable input
- Input Voltage 110V- 220VAC
- Motor Interface port
- 2-phase, 4 wire motor, connect with driver directly
- 4-phase, 6 wire motor, do not connect the middle two wires, and connect the other 2 wires
- 4-phase, 8 wire motor, winding and pairwise parallel connection, then connect with driver
Phase Current settings for motor:
There are 4 dip switches to select AMPS
| Switch: On=0, Off = 1 |
| 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 2 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
| 3 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 |
| 4 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 |
| Current (A) | 0.5 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | 6.0 | 6.5 | 7.0 | 7.5 | 8.0 |
Microstepping Settings
There are 4 dip switches to select microstepping
| Switch: On=0, Off = 1 |
| 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 2 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
| 3 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 |
| 4 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 |
| micro | 1 | 2 | 4 | 5 | 6 | 8 | 10 | 16 | 18 | 20 | 32 | 40 | 50 | 64 | 128 | 256 |
Screen Demo
Mach3 Mill Screen Shots | These are some pictures of the default screens that come with Mach3 Software
|
Wizards (Conversational Programing)
MachMotion's Ultimate Screen Set
This screen set is for Mach3 CNC Software. It allows you to see up to 6 DRO's at a time and is easier to use. Not included in our standard stepper system, but can be added. Live preview below. Click below on the screen to navigate. Some features will not work on this preview.
