Product Details
The Interpreter 1000 is an Ethernet based motion controller for controlling analog drives and motors, data acquisition, and general PID control. Utilizing the latest Digital Signal Processing (DSP) technology, the Interpreter 1000 offers the highest performance in its class.
If you have a machine with good analog drives and motors, but the CNC control is bad this is a cost effective way to get your machine back in working order. You will need a Computer, and a licensed copy of Mach3.
We also sell this controller with our CNC Controls which includes a PC, Mach3 a built in switch panel (Handwheel, E-stop, Cycle Start/Stop, Feed-rate Override, Axis Selector, Jog Increment) and much more. Using our CNC Controls along with the Interpreter makes it much easier to setup and use because we preconfigured everything for you.
| Interpreter 1000 Package Includes: | |
| Interpreter 1000 | - 8 Channel Servo Drive Analog Outputs, Range ±10V, 14-Bit Resolution
- 6 Differential Quadrature Encoder Inputs. 32-Bit Resolution
- 2 Mhz Encoder frequency. Encoder resolution multiplied by 4 through hardware.
- 1 RS-232 Serial Port.
- 48 Digital I/O (32 Inputs & 16 Outputs)
- Ethernet connectivity using TCP/IP interface.
- Wide input power range 10-40VDC
|
| Cables | - 15' cat5 cable to interface to PC
- Power Cable
|
| Configuration Files | - XML file for Mach3. (Pre-configures Mach3 CNC control software to recognize I/0)
- XML file for Interpreter 1000
- Axix works program for setting up the Interpreter and tuning your drives.
|
Features: - Ethernet connectivity using TCP/IP interface.
- Full Spindle feedback with encoder A, B, and I for superior performance.
- Spindle output with + or -10v or 0 to +10 output.
- Can be set to home off of Index pulses from servo motor and or limit switch.
- 2 Handwheel inputs for jogging.
- Full Backlash compensation (With dual loop (linear scale) feedback soon to come!)
- Built in 24v DC power supply
- Built in Din rail for mounting extra relays
- Relay outputs (Expandable)
- R1 Enable
- R2 M3 Spindle Forward
- R3 M4 Spindle Reverse
- R4 M7 Mist
- R5 M8 Coolant
Input & Output List: - 8 Channel Servo Drive Analog Outputs, Range ±10V, 14-Bit Resolution
- 6 Differential Quadrature Encoder Inputs. 32-Bit Resolution
- 2 Mhz Encoder frequency. Encoder resolution multiplied by 4 through hardware.
- 48 Digital I/O (32 Inputs & 16 Outputs)
|
Requirements: - Windows 2000/XP Operating System
- 1Ghz CPU
- 512MB RAM
- Non-integrated Video Card with 32MB RAM
- Basic Computer Skills (ability to copy/rename files, browse directories, etc)
- Desktop PC if using the Mach3 Driver (Laptops are not supported because the power saving features of the chipsets disrupt the pulse stream)
- Mach3 CNC Control software.
|
