Product Details
8 AMP Stepper Drive These drives are very easy to set up and use. They do
not need any additional power supplies, you can wire 110-220VAC directly into the drive.
If you buy this drive with our stepper motors we will pre configure the drive to the motor, and pre-wire the motor to the drive. Please be sure to select you motor wire length.
Also if you buy this drive with our IO6 Breakout Board or with one of our Digital CNC Controls we provide cables to plug the drive directly into our breakout board.
Features: - Low noise and high effective work
- With wide working voltage range
- Flexible Settings
- Perfect protection and Phase controlled circuit break functions
Specifications: - Differential step & direction
- Enable input
- Input Voltage 110V- 220VAC
- Motor Interface port
- 2-phase, 4 wire motor, connect with driver directly
- 4-phase, 6 wire motor, do not connect the middle two wires, and connect the other 2 wires
- 4-phase, 8 wire motor, winding and pairwise parallel connection, then connect with driver
Phase Current settings for motor:
There are 4 dip switches to select AMPS
| Switch: On=0, Off = 1 |
| 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 2 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
| 3 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 |
| 4 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 |
| Current (A) | 0.5 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | 6.0 | 6.5 | 7.0 | 7.5 | 8.0 |
Microstepping Settings
There are 4 dip switches to select microstepping
| Switch: On=0, Off = 1 |
| 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 |
| 2 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 1 | 1 | 1 |
| 3 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 | 0 | 0 | 1 | 1 |
| 4 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 | 0 | 1 |
| micro | 1 | 2 | 4 | 5 | 6 | 8 | 10 | 16 | 18 | 20 | 32 | 40 | 50 | 64 | 128 | 256 |
